New Star Trek

Wand Laser Phaser Conversion

Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion
Wand Laser Phaser Conversion

Wand Laser Phaser Conversion
Star Trek Wand Phaser Hero Laser Conversion. Laser Modified P2 Hero Phaser 2.0 Watt nominal 445nm Blue, DTR G2 Lens.

Photos; New Hero Metal fittings, Mirror Polish All Around, Hero Style 100%, Set Used Colors. General Construction: This is build uses a Wand Co.

LLC Phaser shell with both sound effects and remote control features kept in tact. Other specifications for the Wand Phaser Remote Control Upgrade Build. > P2 handle to a wider, thicker tubular brass Hero handle.

Handle will be hero scale (aka Greg Jein Size & same Jein style details all around), the. P1 Aspirator turn wheel will stay all metal in substance & color (aka as-is). > Correction of P2 body color to screen accurate color (see below), new custom P1 release pin milled & turned in solid brass & polished, fins & trigger also mirror polished finish.

> 2 Watt blue laser to maximize laser visibility, new aluminum spinning Hero nozzle & hidden heat-sink, Greg Jein Hero Phaser screw details added to P2 body. > New screen accurate 60 degree embossed diamond crispy, mirror polished P1 side rails.

> All original Wand sound FX for the P1 will remain intact. > Laser will FIRE AT SAME TIME AS Wand sound effects.

> Original Wand power window/dome for P1 will remain intact & light up. > P1 will detach from P2 body & operate independently; remote control functions remain in tact. > Blue or Red jewel will be mounted on p1 dead center in between aspirator turn wheel & power window/dome. > Emitter tip to P2 will be screen accurate length (not short), crystal side-turn dial access mirror polished. > Lock plate on top front of P2 will be polished, new engraved aluminum top dial & painted aluminum clover.

> Bottom battery access to P2 handle battery compartment will also be milled brass with, brass bottom plate & 2-brass slotted screws and, t-nut, to hero accuracy. > New handle to P2 brass tube handle will be finished in a "Greg Jein" accurate color and gloss. Handle is attached and wired to P2 for Laser Power. > Original P1 charging port remain intact & operational. P1 is on seperate power system for sound FX and vibration FX.

ALWAYS use laser goggles when working with lasers. The system runs on a pair of small but high capacity 3200mAh 3.7 V rechargeable LiOn batteries that are included in the sale. The Batteries are fully concealed in the. No rod in-handle (the bolt at the t-nut is only a stud, not s full length rod). Batteries are in a sled. Laser System Charger and four batteries.

Dimensions of P1/P2 Phaser Assembly (approximately). LLC: 8 1/2 wide x 6 1/4 tall x 2 1/8 deep or about , 22.0 cm x 12.0 cm x 5.5 cm. 4 x4 x 3/4 thick (10cm x 10cm x 2.00cm) with tallest Aluminum armature extending about 6 high (15 cm).

9 square x 2 thick. Phaser comes in the storage box lined with foam. As seen in the video. DTRs G2 coated high power Laser Optics!! Not just any laser optics in this unit.

I personally bench test the laser module & Optics Assembly, then the Optics are precisely adjusted at a target 10-0 away and locked in place with LocTite Blue. You need not worry about adjusting anything.. Not all G2 Optics Systems are the same; both the lens glass-formulations and coating-formulations vary widely, as do the related mounts and, most notably the lens costs.

Multiple long fires of 1 to 2 minutes have not been an issue. Keep in mind you can always feel the external aluminum nozzle/heat-dissipator to see if things are heating-up.

A hot dissipator may be a cue for a minute long rest. As is Stock but A+++ out-of-the-box; added shall be: power jewel, crispy, polished side rails. Krylon Shadow Grey with Set Accurate Greg Jein Hero custom special gunmetal to match sample OR other as approved by you. My private HD Greg Jein color accurate photos will be provided as the images on the internet are not quite right (reproduced too many items, cheap snapshots).

Customer takes on all risk of theft and, or, damage. LiOn batteries included USA only. That includes Canada (sorry my Canadian friends).

The item "Wand Laser Phaser Conversion" is in sale since Saturday, November 24, 2018. This item is in the category "Collectibles\Science Fiction & Horror\Star Trek\Original Series". The seller is "jonpaultrek2012" and is located in Sarasota, Florida. This item can be shipped to United States.

  • Featured Refinements: Star Trek Phaser
  • Universe: Original Series
  • Modified Item: Yes
  • Country/Region of Manufacture: United States
  • Modification Description: New metal nozzle, brass tube hero handle, brass P1 release, engraved aluminum top turn, aluminum clover painted black, laser system, polished; trigger, fins, lock-plate, P1 side-rails.

  • Convention/Event: New York Comic Con
  • Type: Prop Collectable


Wand Laser Phaser Conversion